Session Start Unit; Support Mode Commands - NETGEAR M6100 Series Reference Manual

Field Description
Total Rx Mid0 Alloc Number of times the system tried to allocate a message buffer allocation of class RX Mid0.
Attempts
Total Rx High Alloc Number of times the system tried to allocate a message buffer allocation of class RX High.
Attempts
Total Tx Alloc Number of times the system tried to allocate a message buffer allocation of class TX.
Attempts
Total Rx Norm Number of message buffer allocation failures for RX Norm class of message buffer.
Alloc Failures
Total Rx Mid2 Alloc Number of message buffer allocation failures for RX Mid2 class of message buffer.
Failures
Total Rx Mid1 Alloc Number of message buffer allocation failures for RX Mid1 class of message buffer.
Failures
Total Rx Mid0 Alloc Number of message buffer allocation failures for RX Mid0 class of message buffer.
Failures
Total Rx High Alloc Number of message buffer allocation failures for RX High class of message buffer.
Failures
Total Tx Alloc Number of message buffer allocation failures for TX class of message buffer.
Failures

session start unit

Use this command to initiate a console session from the supervisor blade to a member blade
in the chassis. During the session, troubleshooting and debugging commands can be issued
on the supervisor blade, and the output displays the relevant information from the member
blade specified in the session.
Default Disable
Format
session start unit unit-number
Mode Privileged Exec

Support Mode Commands

Support mode is hidden and available when the techsupport enable command is
executed. The tech support mode is disabled by default. Configurations related to support
mode are shown in the show tech-support command. They can be persisted by using the
command save in support mode. Support configurations are stored in a separate binary
config file, which cannot be uploaded or downloaded.
M6100 Series Switches
Utility Commands
270