User Group Moveusers; User Group Name - NETGEAR M6100 Series Reference Manual

user group name

Use this command to configure a group name. The group-id variable is a number in the
range of 1–10. The name variable can be up to 32 alphanumeric characters.
Format
user group group-id name name
Mode Captive Portal Config

user group moveusers

This command moves existing users from one user group to another. Note that the
destination group must already exist before a move can be successful. The group-id and
destination-group-id variables are each a number in the range of 1-10.
Format
user group group-id moveusers destination-group-id
Mode Captive Portal Config
Command example:
(NETGEAR Switch)(Config-CP) #user group 2 moveusers 3
M6100 Series Switches
Captive Portal Commands
797