NETGEAR M6100 Series Reference Manual page 619

Parameter
Operational Drop
Priorities
Configured No-Drop
Priorities
Delay Allowance
Peer Configuration
Compatible
Compatible Configuration
Count
Incompatible
Configuration Count
Priority
Received PFC Frames
Transmitted PFC Frames
Command example:
(NETGEAR Switch) #show interface 0/1 priority-flow-control
Interface Detail:
PFC Configured State:
PFC Operational State:
Configured Drop Priorities:
Operational Drop Priorities:
Configured No-Drop Priorities:
Operational No-Drop Priorities:
Delay Allowance:
Peer Configuration Compatible:
Compatible Configuration Count:
Incompatible Configuration Count:
Priority Received PFC Frames
-------- ---------------------
00
10
20
30
40
50
60
70
M6100 Series Switches
Description
The 802.1p priority values that the switch is using with a drop priority. The operational drop
priorities might not be the same as the configured priorities if the interface has accepted
different priorities from a peer device
The 802.1p priority values that the switch is using with a no-drop priority. The operational drop
priorities might not be the same as the configured priorities if the interface has accepted
different priorities from a peer device
The operational status of the interface.
Indicates whether the local switch has accepted a compatible configuration from a peer
switch.
The number of received configurations accepted and processed as valid. This number does
not include duplicate configurations.
The number of received configurations that were not accepted from a peer device because
they were incompatible.
The 802.1p priority value.
The number of PFC frames received by the interface with the associated 802.1p priority.
The number of PFC frames transmitted by the interface with the associated 802.1p priority.
0/1
Disabled
Enabled
2-7
2-7
0-1
0-1
32456 bit times
True
3
1
Transmitted PFC Frames
----------------------
0
0
0
0
0
0
0
0
Data Center Commands
619