dhcp l2relay trust
Use this command to configure an interface or range of interfaces as trusted for Option-82
reception.
Default
untrusted
Format
dhcp l2relay trust
Mode
Interface Config
no dhcp l2relay trust
Use this command to configure an interface to the default untrusted for Option-82 reception.
Format
no dhcp l2relay trust
Mode
Interface Config
dhcp l2relay vlan
Use this command to enable the DHCP L2 Relay agent for a set of VLANs. All DHCP packets
which arrive on interfaces in the configured VLAN are subject to L2 Relay processing.
Default
disable
Format
dhcp l2relay vlan vlan-list
Mode
Global Config
Parameter
Description
vlan–list
The VLAN ID. The range is 1–4093. Separate nonconsecutive IDs with a comma (,) no spaces and
no zeros in between the range. Use a dash (–) for the range.
no dhcp l2relay vlan
Use this command to disable the DHCP L2 Relay agent for a set of VLANs.
Format
no dhcp l2relay vlan vlan-list
Mode
Global Config
show dhcp l2relay all
This command displays the summary of DHCP L2 Relay configuration.
Format
show dhcp l2relay all
Mode
Privileged EXEC
M6100 Series Switches
Switching Commands
483