Passwords Strength Minimum Numeric-Characters; Passwords Strength Minimum Special-Characters - NETGEAR M6100 Series Reference Manual

no passwords strength minimum lowercase-letters
Use this command to reset the minimum lower letters required in a password to the default
value.
Format
no passwords minimum lowercase-letter
Mode Global Config

passwords strength minimum numeric-characters

Use this command to enforce a minimum number of numeric characters that a password
should contain. The number argument is a number in the range 0–16. T The default is 2.
Minimum of 0 means no restriction on that set of characters.
Default 2
Format
passwords strength minimum numeric-characters number
Mode Global Config
no passwords strength minimum numeric-characters
Use this command to reset the minimum numeric characters required in a password to the
default value.
Format
no passwords minimum numeric-characters
Mode Global Config

passwords strength minimum special-characters

Use this command to enforce a minimum number of special characters that a password
should contain. The number argument is a number in the range 0–16. The default is 2.
Minimum of 0 means no restriction on that set of characters.
Default 2
Format
passwords strength minimum special-characters number
Mode Global Config
no passwords strength minimum special-characters
Use this command to reset the minimum special characters required in a password to the
default value.
Format
no passwords minimum special-characters
Mode Global Config
M6100 Series Switches
Management Commands
98