Debug Authentication; Debug Auto-Voip; Debug Clear; Debug Console - NETGEAR M6100 Series Reference Manual

debug authentication

This command displays either the debug trace for either a single event or all events for an
interface.
Note: To display the debug trace, enable the
Default none
Format
debug authentication packet {all | event} interface unit/slot/port
Mode Privileged EXEC

debug auto-voip

Use this command to enable Auto VoIP debug messages. Use the optional parameters to
trace H323, SCCP, SIP, OUI packets respectively.
Note: To display the debug trace, enable the
Default disabled
Format
debug auto-voip [H323 | SCCP |SIP | oui]
Mode Privileged EXEC
no debug auto-voip
Use this command to disable Auto VOIP debug messages.
Format
no debug auto-voip
Mode Privileged EXEC

debug clear

This command disables all previously enabled "debug" traces.
Note: To display the debug trace, enable the
Default disabled
Format
debug clear
Mode Privileged EXEC

debug console

This command enables the display of "debug" trace output on the login session in which it is
executed. Debug console display must be enabled in order to view any trace output. The
output of debug trace commands will appear on all login sessions for which debug console
has been enabled. The configuration of this command remains in effect for the life of the login
session. The effect of this command is not persistent across resets.
M6100 Series Switches
debug console
debug console
debug console
Utility Commands
241
command.
command.
command.