Show Sysinfo; Show Tech-Support - NETGEAR M6100 Series Reference Manual

show sysinfo

This command displays switch information.
Format
show sysinfo
Mode Privileged EXEC
Term Definition
Switch Description Text used to identify this switch.
System Name Name used to identify the switch.The factory default is blank. To configure the system
name, see
System Location Text used to identify the location of the switch. The factory default is blank. To
configure the system location, see
System Contact Text used to identify a contact person for this switch. The factory default is blank. To
configure the system location, see
System ObjectID The base object ID for the switch's enterprise MIB.
System Up Time The time in days, hours and minutes since the last switch reboot.
Current SNTP The system time acquired from a network SNTP server.
Synchronized Time
MIBs Supported A list of MIBs supported by this agent.

show tech-support

Use the show tech-support command to display system and configuration information
when you contact technical support. The output of the show tech-support command
combines the output of the following commands and includes log history files from previous
runs:
• show version
• show sysinfo
• show port all
• show isdp neighbors
• show logging
• show event log
• show logging buffered
• show trap log
• show running-config
Including the optional ospf parameter also displays OSPF information.
Format
show tech-support [bgp | bgp-ipv6 | ospf | ospfv3]
Mode Privileged EXEC
M6100 Series Switches
snmp-server on page 108.
snmp-server
snmp-server
Utility Commands
177
on page 108.
on page 108.