Logging Email Message-Type To-Addr; Logging Email From-Addr - NETGEAR M6100 Series Reference Manual

Default Alert (1) and emergency (0) messages are sent immediately.
Format
logging email urgent {severitylevel | none}
Mode Global Config
no logging email urgent
This command resets the urgent severity level to the default value.
Format
no logging email urgent
Mode Global Config

logging email message-type to-addr

This command configures the email address to which messages are sent. The message
types supported are urgent, non-urgent, and both. For each supported severity level,
multiple email addresses can be configured. The to-email-addr variable is a standard
email address, for example admin@yourcompany.com.
Format
logging email message-type {urgent |non-urgent | both} to-addr to-email-addr
Mode Global Config
no logging email message-type to-addr
This command removes the configured to-addr field of email.
Format
no logging email message-type {urgent | non-urgent | both} to-addr
to-email-addr
Mode Global Config

logging email from-addr

This command configures the email address of the sender (the switch).
Default switch@netgear.com
Format
logging email from-addr from-email-addr
Mode Global Config
M6100 Series Switches
Utility Commands
190