no area stub
This command deletes a stub area for the specified area ID.
Format
no area area-id stub
Mode
Router OSPFv3 Config
area stub no-summary (OSPFv3)
This command disables the import of Summary LSAs for the stub area identified by
area-id.
Default
enabled
Format
area area-id stub no-summary
Mode
Router OSPFv3 Config
no area stub no-summary
This command sets the Summary LSA import mode to the default for the stub area identified
by area-id.
Format
no area area-id stub summarylsa
Mode
Router OSPFv3 Config
area virtual-link (OSPFv3)
This command creates the OSPF virtual interface for the specified area-id and neighbor.
The neighbor parameter is the Router ID of the neighbor.
Format
area area-id virtual-link neighbor
Mode
Router OSPFv3 Config
no area virtual-link
This command deletes the OSPF virtual interface for the specified area-id and neighbor.
The neighbor parameter is the Router ID of the neighbor.
Format
no area area-id virtual-link neighbor
Mode
Router OSPFv3 Config
area virtual-link dead-interval (OSPFv3)
This command configures the dead interval for the OSPF virtual interface on the virtual
interface identified by area-id and neighbor
of the neighbor. The range for seconds is 1 to 65535.
M6100 Series Switches
The neighbor parameter is the Router ID
.
IPv6 Commands
932