Radius Server Key - NETGEAR M6100 Series Reference Manual

active server in the servers that are identified by the same server name, then the RADIUS
client selects another server for making RADIUS transactions. If the 'auth' token is used, the
previously configured RADIUS authentication server is removed from the configuration.
Similarly, if the 'acct' token is used, the previously configured RADIUS accounting server is
removed from the configuration. The ipaddr or dnsname argument must match the IP
address or DNS name of the previously configured RADIUS authentication or accounting
server.
Format
no radius server host {auth | acct} {ipaddr | dnsname}
Mode Global Config
Command example:
(NETGEAR Switch) (Config) #radius server host acct 192.168.37.60
(NETGEAR Switch) (Config) #radius server host acct 192.168.37.60 port 1813
(NETGEAR Switch) (Config) #radius server host auth 192.168.37.60 name Network1_RS port
1813
(NETGEAR Switch) (Config) #radius server host acct 192.168.37.60 name Network2_RS
(NETGEAR Switch) (Config) #no radius server host acct 192.168.37.60

radius server key

This command configures the key to be used in RADIUS client communication with the
specified server. Depending on whether the auth or acct token is used, the shared secret is
configured for the RADIUS authentication or RADIUS accounting server. The IP address or
hostname provided must match a previously configured server. When this command is
executed, the secret is prompted.
Text-based configuration supports Radius server's secrets in encrypted and non-encrypted
format. When you save the configuration, these secret keys are stored in encrypted format
only. If you want to enter the key in encrypted format, enter the key along with the encrypted
keyword. In the output of the show running-config command (for information about the
command, see show running-config
encrypted format. You cannot show these keys in plain text format.
Note: The secret must be an alphanumeric value not exceeding 16 characters.
Format
radius server key {auth | acct} {ipaddr | dnsname} encrypted password
Mode Global Config
Field Description
ipaddr The IP address of the server.
M6100 Series Switches
on page 171), these secret keys are displayed in
Management Commands
122