Show Sntp; Show Sntp Client - NETGEAR M6100 Series Reference Manual

no sntp source-interface
Use this command to reset the SNTP source interface to the default settings.
Format
no sntp source-interface
Mode Global Config

show sntp

This command is used to display SNTP settings and status.
Format
show sntp
Mode Privileged EXEC
Term Definition
Last Update Time Time of last clock update.
Last Attempt Time Time of last transmit query (in unicast mode).
Last Attempt Status Status of the last SNTP request (in unicast mode) or unsolicited message (in broadcast mode).
Broadcast Count Current number of unsolicited broadcast messages that have been received and processed by the
SNTP client since last reboot.

show sntp client

This command is used to display SNTP client settings.
Format
show sntp client
Mode Privileged EXEC
Term
Client Supported Modes
SNTP Version
Port
Client Mode
M6100 Series Switches
Definition
Supported SNTP Modes (Broadcast or Unicast).
The highest SNTP version the client supports.
SNTP Client Port. The field displays the value 0 if it is default value. When the client port
value is 0, if the client is in broadcast mode, it binds to port 123; if the client is in unicast
mode, it binds to the port assigned by the underlying OS.
Configured SNTP Client Mode.
Utility Commands
211