Ip Ospf Cost; Ip Ospf Database-Filter All Out - NETGEAR M6100 Series Reference Manual

no ip ospf authentication
This command resets the default OSPF authentication type for the interface.
Format
no ip ospf authentication
Mode Interface Config

ip ospf cost

This command configures the cost on an OSPF interface or range of interfaces. The cost
parameter has a range of 1 to 65535.
Default 10
Format
ip ospf cost cost
Mode Interface Config
no ip ospf cost
This command configures the default cost on an OSPF interface.
Format
no ip ospf cost
Mode Interface Config

ip ospf database-filter all out

This command disables OSPFv2 LSA flooding on an interface. Use this command in
Interface Configuration mode.
Default Disabled
Format
ip ospf database-filter all out
Mode Interface Configuration
no ip ospf database-filter all out
This command enables OSPFv2 LSA flooding on an interface. Use this command in Interface
Configuration mode.
Default Disabled
Format
no ip ospf database-filter all out
Mode Interface Configuration
M6100 Series Switches
Routing Commands
724