Ip Irdp Holdtime; Ip Irdp Address - NETGEAR M6100 Series Reference Manual

ip irdp
This command enables Router Discovery on an interface or range of interfaces.
Default disabled
Format
ip irdp
Mode Interface Config
no ip irdp
This command disables Router Discovery on an interface.
Format
no ip irdp
Mode Interface Config

ip irdp address

This command configures the address that the interface uses to send the router discovery
advertisements. The valid values for ipaddr are 224.0.0.1, which is the all-hosts IP multicast
address, and 255.255.255.255, which is the limited broadcast address.
Default 224.0.0.1
Format
ip irdp address ipaddr
Mode Interface Config
no ip irdp address
This command configures the default address used to advertise the router for the interface.
Format
no ip irdp address
Mode Interface Config

ip irdp holdtime

This command configures the value of the holdtime field of the router advertisement sent
from this interface. The seconds argument holdtime value is in the range of 4 to 9000
seconds.
Default 3 * maxinterval
Format
ip irdp holdtime seconds
Mode Interface Config
M6100 Series Switches
Routing Commands
676