Show Ip Ospf Area - NETGEAR M6100 Series Reference Manual

Term Definition
Area ID The area ID of the area from which this route is learned.
Next Hop Next hop toward the destination.
Next Hop Intf The outgoing router interface to use when forwarding traffic to the next hop.

show ip ospf area

This command displays information about the area. The area-id identifies the OSPF area
that is being displayed.
Format
show ip ospf area area-id
Modes Privileged EXEC
User EXEC
Term Definition
AreaID The area id of the requested OSPF area.
External Routing A number representing the external routing capabilities for this area.
Spf Runs The number of times that the intra-area route table has been calculated using this area's link-state
database.
Area Border Router The total number of area border routers reachable within this area.
Count
Area LSA Count Total number of link-state advertisements in this area's link-state database, excluding AS External
LSA's.
Area LSA A number representing the Area LSA Checksum for the specified AreaID excluding the external (LS
Checksum type 5) link-state advertisements.
Flood List Length The number of LSAs waiting to be flooded within the area.
Import Summary Shows whether to import summary LSAs.
LSAs
OSPF Stub Metric The metric value of the stub area. This field displays only if the area is a configured as a stub area.
Value
The following OSPF NSSA specific information displays only if the area is configured as an
NSSA.
Term Definition
Import Summary Shows whether to import summary LSAs into the NSSA.
LSAs
Redistribute into Shows whether to redistribute information into the NSSA.
NSSA
M6100 Series Switches
Routing Commands
740