Aaa Authentication Dot1X Default; Clear Dot1X Statistics; Port-Based Network Access Control Commands - NETGEAR M6100 Series Reference Manual

Term Definition
Description The text description of this multicast table entry.
Interfaces The list of interfaces that are designated for forwarding (Fwd:) and filtering (Flt:).

Port-Based Network Access Control Commands

This section describes the commands you use to configure port-based network access
control (IEEE 802.1X). Port-based network access control allows you to permit access to
network services only to and devices that are authorized and authenticated.

aaa authentication dot1x default

Use this command to configure the authentication method for port-based access to the
switch. The additional methods of authentication are used only if the previous method returns
an error, not if there is an authentication failure. The possible methods are as follows:
• ias. Uses the internal authentication server users database for authentication. This
method can be used in conjunction with any one of the existing methods like local, radius,
and so on.
• local. Uses the local user name database for authentication.
• none. Uses no authentication.
• radius. Uses the list of all RADIUS servers for authentication.
Format
aaa authentication dot1x default {[ias]|[method1 [method2 [method3]]]}
Mode Global Config
Command example:
(NETGEAR Routing) #
(NETGEAR Routing) #configure
(NETGEAR Routing) (Config)#aaa authentication dot1x default ias none
(NETGEAR Routing) (Config)#aaa authentication dot1x default ias local radius none

clear dot1x statistics

This command resets the 802.1X statistics for the specified port or for all ports.
Format
clear dot1x statistics {unit/slot/port | all}
Mode Privileged EXEC
M6100 Series Switches
Switching Commands
396