Set Igmp Maxresponse - NETGEAR M6100 Series Reference Manual

Default 260 seconds
Format
set igmp groupmembership-interval [vlan-id] seconds
Mode Interface Config
Global Config
VLAN Config
no set igmp groupmembership-interval
This command sets the IGMPv3 group membership interval time to the default value.
Format
no set igmp groupmembership-interval [vlan-id]
Mode Interface Config
Global Config
VLAN Config

set igmp maxresponse

This command sets the IGMP maximum response time for the system, on a particular
interface or VLAN, or on a range of interfaces. The maximum response time is the amount of
time in seconds that a switch will wait after sending a query on an interface because it did not
receive a report for a particular group in that interface. This value must be less than the IGMP
query Interval time value. The range is 1 to 25 seconds.
Default 10 seconds
Format
set igmp maxresponse [vlan-id] seconds
Mode Global Config
Interface Config
VLAN Config
no set igmp maxresponse
This command sets the max response time (on the interface or VLAN) to the default value.
Format
no set igmp maxresponse [vlan-id]
Mode Global Config
Interface Config
VLAN Config
M6100 Series Switches
Switching Commands
515