Show Mvr Members; Show Mvr Interface - NETGEAR M6100 Series Reference Manual

Command example:
(NETGEAR Switch)#show mvr
MVR Running.............................. TRUE
MVR multicast VLAN....................... 1200
MVR Max Multicast Groups................. 256
MVR Current multicast groups............. 1
MVR Global query response time........... 10 (tenths of sec)
MVR Mode................................. compatible

show mvr members

This command displays the MVR membership groups allocated. A.B.C.D is a valid multicast
address in IPv4 dotted notation.
Format
show mvr members [A.B.C.D]
Mode Privileged EXEC
The following table describes the output parameters.
Term
MVR Group IP
Status
Members
Command example:
(NETGEAR Switch)#show mvr members
MVR Group IP
------------------
224.1.1.1
(switch)#show mvr members 224.1.1.1
MVR Group IP
------------------
224.1.1.1

show mvr interface

This command displays the MVR-enabled interfaces configuration.
Format
show mvr interface [interface-id [members [vlan vid]]]
Mode Privileged EXEC
M6100 Series Switches
Definition
MVR group multicast IP address.
The status of the specific MVR group. It can be active or inactive.
The list of ports that participates in the specified MVR group.
Status Members
--------------- ---------------------
INACTIVE 0/1, 0/2, 0/3
Status Members
--------------- ---------------------
INACTIVE 0/1, 0/2, 0/3
Switching Commands
510