User Max-Bandwidth-Down; User Max-Input-Octets - NETGEAR M6100 Series Reference Manual

Format
no user user-id max-bandwidth-up
Mode Captive Portal Config

user max-bandwidth-down

This command is used configure the bandwidth in bytes per second (bps, with the variable) at
which the client can receive data from the network. 0 denotes using the default value
configured for the captive portal. The user-id variable is the ID of a user configured in the
local database, and is a number in the range of 1 to 128.
Default 0
Format
user user-id max-bandwidth-down bps
Mode Captive Portal Config
Parameter Description
user-id User ID from 1 to 128 characters.
bps Client receive rate in bps. 0 denotes unlimited bandwidth.
no user max-bandwidth down
Use this command to set to the default value the bandwidth at which the client can receive
data from the network. The user-id variable is the ID of a user configured in the local
database, and is a number in the range of 1 to 128.
Format
no user user-id max-bandwidth-down
Mode Captive Portal Config

user max-input-octets

This command is used to limit the number of octets in bytes that the user is allowed to
transmit. After this limit has been reached, the user will be disconnected. 0 octets denote
unlimited transmission. The user-id variable is the ID of a user configured in the local
database, and is a number in the range of 1 to 128.
Default 0
Format
user user-id max-input-octets octets
Mode Captive Portal Config
M6100 Series Switches
Captive Portal Commands
793