Show Supported Switchtype; Show Chassis-Status - NETGEAR M6100 Series Reference Manual

show chassis-status

Every two seconds, a blade broadcasts heartbeat messages. A state table on the supervisor
and each blade tracks every unit in the chassis. The table maintains a running history of the
heartbeat messages, current observed interval, and the minimum, maximum, and average
observed times between heartbeat messages. Sequence numbers in the discovery
messaged determine loss.
Format
chassis-status unit [unit | all] [clear]
Mode User EXEC
Command example:
(NETGEAR Switch) #show chassis-status 1
Chassis Unit 1 Status
Unit Current Average
1 2000 2000
2 2000 2100
3 2000 2100

show supported switchtype

This commands displays information about all supported switch types or a specific switch
type.
Format
show supported switchtype [switchindex]
Mode User EXEC
Privileged EXEC
If you do not supply a value for switchindex, the following output appears:
Term Definition
Switch Index (SID) The index into the database of supported blade types. This index is used when you
preconfigure a member to be added to the chassis.
Model Identifier The model identifier for the supported blade type.
Management The management preference value of the blade type.
Preference
Code Version The code load target identifier of the blade type.
M6100 Series Switches
Min Max Dropped
2000 2000 0
2000 2500 0
2000 2200 0
Chassis Commands
35