Show Ip Ospf Virtual-Link; Show Ip Ospf Virtual-Link Brief - NETGEAR M6100 Series Reference Manual

Current
Hello 0
ACK 2
Data 24
Event 1

show ip ospf virtual-link

This command displays the OSPF Virtual Interface information for a specific area and
neighbor. The area-id parameter identifies the area and the neighbor parameter
identifies the neighbor's Router ID.
Format
show ip ospf virtual-link area-id neighbor
Modes Privileged EXEC
User EXEC
Term Definition
Area ID The area id of the requested OSPF area.
Neighbor Router ID The input neighbor Router ID.
Hello Interval The configured hello interval for the OSPF virtual interface.
Dead Interval The configured dead interval for the OSPF virtual interface.
Interface Transmit The configured transmit delay for the OSPF virtual interface.
Delay
Retransmit Interval The configured retransmit interval for the OSPF virtual interface.
Authentication The configured authentication type of the OSPF virtual interface.
Type
State The OSPF Interface States are: down, loopback, waiting, point-to-point, designated router, and
backup designated router. This is the state of the OSPF interface.
Neighbor State The neighbor state.

show ip ospf virtual-link brief

This command displays the OSPF Virtual Interface information for all areas in the system.
Format
show ip ospf virtual-link brief
Modes Privileged EXEC
User EXEC
M6100 Series Switches
Max Drops Limit
10 0 500
12 0 1680
47 0 500
8 0 1000
Routing Commands
755