Show Mldsnooping - NETGEAR M6100 Series Reference Manual

show mldsnooping

Use this command to display MLD Snooping information. Configured information is displayed
whether or not MLD Snooping is enabled.
Format
show mldsnooping [unit/slot/port | vlan-id]
Mode Privileged EXEC
When the optional arguments unit/slot/port or vlan-id are not used, the command
displays the following information.
Term Definition
Admin Mode Indicates whether or not MLD Snooping is active on the switch.
Interfaces Enabled Interfaces on which MLD Snooping is enabled.
for MLD Snooping
MLD Control Frame Displays the number of MLD Control frames that are processed by the CPU.
Count
VLANs Enabled for VLANs on which MLD Snooping is enabled.
MLD Snooping
When you specify the unit/slot/port values, the following information displays.
Term Definition
MLD Snooping Indicates whether MLD Snooping is active on the interface.
Admin Mode
Fast Leave Mode Indicates whether MLD Snooping Fast Leave is active on the VLAN.
Group Membership Shows the amount of time in seconds that a switch will wait for a report from a particular group on a
Interval particular interface, which is participating in the VLAN, before deleting the interface from the entry.
This value may be configured.
Max Response Displays the amount of time the switch waits after it sends a query on an interface, participating in
Time the VLAN, because it did not receive a report for a particular group on that interface. This value may
be configured.
Multicast Router Displays the amount of time to wait before removing an interface that is participating in the VLAN
Present Expiration from the list of interfaces with multicast routers attached. The interface is removed if a query is not
Time received. This value may be configured.
When you specify a value for vlan-id, the following information displays.
Term Definition
VLAN Admin Mode Indicates whether MLD Snooping is active on the VLAN.
M6100 Series Switches
Switching Commands
530