Show Rmon - NETGEAR M6100 Series Reference Manual

Command example:
(NETGEAR Switch) (Interface 1/0/1-1/0/10)#rmon collection history 1 buckets 10 interval
30 owner myOwner
Error: 'rmon collection history' is not supported on range of interfaces.
no rmon collection history
This command will delete the history control group entry with the specified index number.
Format
no rmon collection history index-number
Mode Interface Config
Command example:
(NETGEAR Switch) (Interface 1/0/1-1/0/10)# no rmon collection history 1

show rmon

This command displays the entries in the RMON alarm table.
Format
show rmon {alarms | alarm alarm-index}
Mode Privileged Exec
Term Description
Alarm Index An index that uniquely identifies an entry in the alarm table. Each entry defines a diagnostic sample
at a particular interval for an object on the device. The range is 1 to 65535.
Alarm Variable The object identifier of the particular variable to be sampled. Only variables that resolve to an ASN.1
primitive type of integer.
Alarm Interval The interval in seconds over which the data is sampled and compared with the rising and falling
thresholds. The range is 1 to 2147483647. The default is 1.
Alarm Absolute The value of the statistic during the last sampling period. This object is a read-only, 32-bit signed
Value value.
Alarm Rising The rising threshold for the sample statistics. The range is 2147483648 to 2147483647. The default
Threshold is 1.
Alarm Rising Event The index of the eventEntry that is used when a rising threshold is crossed. The range is 1 to 65535.
Index The default is 1.
Alarm Falling The falling threshold for the sample statistics. The range is 2147483648 to 2147483647. The default
Threshold is 1.
Alarm Falling Event The index of the eventEntry that is used when a falling threshold is crossed. The range is 1 to 65535.
Index The default is 2.
M6100 Series Switches
Utility Commands
303