Show Lacp Partner; Show Port-Channel Brief - NETGEAR M6100 Series Reference Manual

show lacp partner

Use this command to display LACP partner attributes. Instead of unit/slot/port, lag
lag-intf-num can be used as an alternate way to specify the LAG interface, in which
lag-intf-num is the LAG port number.
Format
show lacp actor {unit/slot/port | all}
Mode Privileged EXEC
The following output parameters are displayed.
Parameter Description
System Priority The administrative value of priority associated with the Partner's System ID.
System-ID Represents the administrative value of the Aggregation Port's protocol Partner's System ID.
Admin Key The administrative value of the Key for the protocol Partner.
Port Priority The administrative value of the Key for protocol Partner.
Port-ID The administrative value of the port number for the protocol Partner.
Admin State The administrative values of the actor state for the protocol Partner.

show port-channel brief

This command displays the static capability of all port-channel (LAG) interfaces on the device
as well as a summary of individual port-channel interfaces. Instead of unit/slot/port,
lag lag-intf-num can be used as an alternate way to specify the LAG interface, in which
lag-intf-num is the LAG port number.
Format
show port-channel brief
Mode User EXEC
For each port-channel the following information is displayed.
Term Definition
Logical Interface The unit/slot/port of the logical interface.
Port-channel Name The name of port-channel (LAG) interface.
Link-State Shows whether the link is up or down.
Trap Flag Shows whether trap flags are enabled or disabled.
Type Shows whether the port-channel is statically or dynamically maintained.
Mbr Ports The members of this port-channel.
Active Ports The ports that are actively participating in the port-channel.
M6100 Series Switches
Switching Commands
459