Dos-Control Smacdmac; Dos-Control Tcpport - NETGEAR M6100 Series Reference Manual

no dos-control l4port
This command disables L4 Port Denial of Service protections.
Format
no dos-control l4port
Mode Global Config

dos-control smacdmac

This command enables Source MAC address = Destination MAC address (SMAC = DMAC)
Denial of Service protection. If the mode is enabled, Denial of Service prevention is active for
this type of attack. If packets ingress with SMAC = DMAC, the packets will be dropped if the
mode is enabled.
Default disabled
Format
dos-control smacdmac
Mode Global Config
no dos-control smacdmac
This command disables Source MAC address = Destination MAC address (SMAC = DMAC)
DoS protection.
Format
no dos-control smacdmac
Mode Global Config

dos-control tcpport

This command enables TCP L4 source = destination port number (Source TCP Port =
Destination TCP Port) Denial of Service protection. If the mode is enabled, Denial of Service
prevention is active for this type of attack. If packets ingress with Source TCP Port =
Destination TCP Port, the packets will be dropped if the mode is enabled.
Default disabled
Format
dos-control tcpport
Mode Global Config
no dos-control tcpport
This command disables TCP L4 source = destination port number (Source TCP Port =
Destination TCP Port) Denial of Service protection.
Format
no dos-control tcpport
Mode Global Config
M6100 Series Switches
Switching Commands
562