Lacp Partner Admin State Longtimeout; Lacp Partner Admin State Passive - NETGEAR M6100 Series Reference Manual

lacp partner admin state longtimeout

Use this command to set LACP partner admin state to longtimeout.
Format
lacp partner admin state longtimeout
Mode Interface Config
Note: This command is applicable only to physical interfaces.
no lacp partner admin state longtimeout
Use this command to set the LACP partner admin state to short timeout.
Format
no lacp partner admin state longtimeout
Mode Interface Config
Note: This command is applicable only to physical interfaces.

lacp partner admin state passive

Use this command to set the LACP partner admin state to passive.
Format
lacp partner admin state passive
Mode Interface Config
Note: This command is applicable only to physical interfaces.
no lacp partner admin state passive
Use this command to set the LACP partner admin state to active.
Format
no lacp partner admin state passive
Mode Interface Config
M6100 Series Switches
Switching Commands
450