Show Captive-Portal Configuration Interface; Show Captive-Portal Configuration Status - NETGEAR M6100 Series Reference Manual

show captive-portal configuration interface

This command displays information for all interfaces assigned to a captive portal
configuration or a specific interface assigned to a captive portal configuration. The cp-id
variable is the captive portal ID, which ranges from 1-10.
Format
show captive-portal configuration cp-id interface [unit/slot/port]
Mode Privileged EXEC
Term Description
CP ID Shows the captive portal ID.
CP Name Shows the captive portal name.
Interface
unit/slot/port
Interface Describes the interface.
Description
Operational Status Shows whether the captive portal is enabled or disabled
Block Status Shows the blocked status, which is Blocked or Not Blocked.
If you include the optional unit/slot/port information, the following additional information appears:
Disable Reason If the captive portal is disabled, this field indicates the reason.
Authenticated Shows the number of authenticated users connected to the network through this captive portal.
Users

show captive-portal configuration status

This command displays information of all configured captive portal configurations or a
specific captive portal configuration. The cp-id variable is the captive portal ID, which
ranges from 1-10.
Format
show captive-portal configuration cp-id status
Mode Privileged EXEC
Term Description
CP ID Shows the captive portal ID.
CP Name Shows the captive portal name.
CP Mode Shows whether the CP is enabled or disabled.
Protocol Mode Shows the current connection protocol, which is either HTTP or HTTPS.
Verification Mode Shows the current account type, which is Guest, Local, or RADIUS.
URL Redirect Indicates whether the Redirect URL Mode is enabled or disabled.
Mode
M6100 Series Switches
Captive Portal Commands
783