ip dhcp snooping database write-delay (DHCP)
Use this command to configure the interval in seconds at which the DHCP Snooping
database persists. The interval value ranges from 15 to 86400 seconds.
Default
300 seconds
Format
ip dhcp snooping database write-delay seconds
Mode
Global Config
no ip dhcp snooping database write-delay
Use this command to set the write delay value to the default value.
Format
no ip dhcp snooping database write-delay
Mode
Global Config
ip dhcp snooping binding
Use this command to configure static DHCP Snooping binding.
Format
ip dhcp snooping binding mac-address vlan vlan-id ipaddress interface
interface-id
Mode
Global Config
no ip dhcp snooping binding
Use this command to remove the DHCP static entry from the DHCP Snooping database.
Format
no ip dhcp snooping binding mac-address
Mode
Global Config
ip verify binding
Use this command to configure static IP source guard (IPSG) entries.
Format
ip verify binding mac-address vlan vlan-id ipaddress interface interface-id
Mode
Global Config
M6100 Series Switches
Switching Commands
490