Lldp Notification; Lldp Transmit-Mgmt; Lldp Notification-Interval - NETGEAR M6100 Series Reference Manual

lldp transmit-mgmt

Use this command to include transmission of the local system management address
information in the LLDPDUs. This command can be used to configure a single interface or a
range of interfaces.
Format
lldp transmit-mgmt
Mode Interface Config
no lldp transmit-mgmt
Use this command to include transmission of the local system management address
information in the LLDPDUs. Use this command to cancel inclusion of the management
information in LLDPDUs.
Format
no lldp transmit-mgmt
Mode Interface Config

lldp notification

Use this command to enable remote data change notifications on an interface or a range of
interfaces.
Default disabled
Format
lldp notification
Mode Interface Config
no lldp notification
Use this command to disable notifications.
Default disabled
Format
no lldp notification
Mode Interface Config

lldp notification-interval

Use this command to configure how frequently the system sends remote data change
notifications. The interval parameter is the number of seconds to wait between sending
notifications. The valid interval range is 5–3600 seconds.
Default 5
Format
lldp notification-interval interval
Mode Global Config
M6100 Series Switches
Switching Commands
544