Ip Cpu-Priority; Ipv6 Cpu-Priority; Cpu Queue Commands - NETGEAR M6100 Series Reference Manual

Config file 'startup-config' created successfully .
The configuration changes have been applied and saved.
Please enter 'show running-config' to see the final configuration.
Thanks for using EzConfig!

CPU Queue Commands

You can send all packets with a specified destination address to a higher priority queue (5)
than the default queue for data packets and unicast packets to the CPU.

ip cpu-priority

This command sends all packets with a specified destination IPv4 address to a higher priority
queue (5) than the default queue for data packets and unicast packets to the CPU.
Format
ip cpu-priority ip-address
Mode Privileged EXEC
no ip cpu-priority
This command removes all packets with a specified destination IPv4 address from the higher
priority queue.
Format
no ip cpu-priority ip-address
Mode Privileged EXEC

ipv6 cpu-priority

The command allows all packets with a specified destination IPv6 address into a higher
priority queue (5) than the default queue for data packets and unicast packets to the CPU.
Format
ip cpu-priority ipv6-address
Mode Privileged EXEC
no ipv6 cpu-priority
This command removes all packets with a specified destination IPv6 address from the higher
priority queue.
Format
no ip cpu-priority ipv6-address
Mode Privileged EXEC
M6100 Series Switches
Management Commands
46