Show Interfaces Random-Detect - NETGEAR M6100 Series Reference Manual

configuration of the interface is displayed. If omitted, the most recent global configuration
settings are displayed.
Format
show interfaces cos-queue [unit/slot/port]
Mode Privileged EXEC
Term
Interface Shaping Rate
WRED Decay Exponent
Queue Id
Minimum Bandwidth
Maximum Bandwidth
Scheduler Type
Queue Management Type
If you specify the interface, the command also displays the following information.
Term
Interface
Interface Shaping Rate
WRED Decay Exponent

show interfaces random-detect

This command displays the global WRED settings for each CoS queue. If you specify the
unit/slot/port, the command displays the WRED settings for each CoS queue on the
specified interface.
Format
show interfaces random-detect [unit/slot/port]
Mode Privileged EXEC
M6100 Series Switches
Definition
The global interface shaping rate value.
The global WRED decay exponent value.
An interface supports n queues numbered 0 to (n-1). The specific n value is platform
dependent.
The minimum transmission bandwidth guarantee for the queue, expressed as a
percentage. A value of 0 means bandwidth is not guaranteed and the queue operates
using best-effort. This is a configured value.
The maximum transmission bandwidth guarantee for the queue, expressed as a
percentage. A value of 0 means bandwidth is not guaranteed and the queue operates
using best-effort. This is a configured value.
Indicates whether this queue is scheduled for transmission using a strict priority or a
weighted scheme. This is a configured value.
The queue depth management technique used for this queue (tail drop).
Definition
The unit/slot/port of the interface. If displaying the global configuration, this output line
is replaced with a Global Config indication.
The maximum transmission bandwidth limit for the interface as a whole. It is independent of
any per-queue maximum bandwidth value(s) in effect for the interface. This is a configured
value.
The configured WRED decay exponent for a CoS queue interface.
Quality of Service Commands
1002