Show Dhcp L2Relay Stats Interface - NETGEAR M6100 Series Reference Manual

Interface L2RelayMode
---------- -----------
0/2 Enabled
0/4 Disabled
show dhcp l2relay remote-id vlan
This command displays DHCP Remote-id vlan configuration.
Format
show dhcp l2relay remote-id vlan vlan-list
Mode Privileged EXEC
Parameter Description
vlan-list Enter VLAN IDs in the range 1–4093. Use a dash (–) to specify a range or a comma (,) to separate
VLAN IDs in a list. Spaces and zeros are not permitted.

show dhcp l2relay stats interface

This command displays statistics specific to DHCP L2 Relay configured interface.
Format
show dhcp l2relay stats interface {all | unit/slot/port}
Mode Privileged EXEC
Command example:
((NETGEAR Switch)) #show dhcp l2relay stats interface all
DHCP L2 Relay is Enabled.
Interface UntrustedServer
MsgsWithOpt82
--------- ---------------
0/1 0
0/2 0
0/3 0
0/4 0
0/5 0
0/6 3
0/7 0
0/8 0
0/9 0
M6100 Series Switches
TrustMode
--------------
untrusted
trusted
UntrustedClient
MsgsWithOpt82
---------------
0
0
0
12
0
0
0
0
0
Switching Commands
485
TrustedServer TrustedClient
MsgsWithoutOpt82 MsgsWithoutOpt82
---------------- --------------
0
3
0
0
0
0
0
0
0
0
7
0
0
0
0
0
0
0