Session-Timeout (Line Config) - NETGEAR M6100 Series Reference Manual

no transport output telnet
Use this command to prevent new outbound Telnet connection from being established.
Format
no transport output telnet
Mode Line Config
session-limit
This command specifies the maximum number of simultaneous outbound Telnet sessions.
The number argument can be a number in the range from 0–5. A value of 0 indicates that no
outbound Telnet session can be established.
Default 5
Format
session-limit number
Mode Line Config
no session-limit
This command sets the maximum number of simultaneous outbound Telnet sessions to the
default value.
Format
no session-limit
Mode Line Config

session-timeout (Line Config)

This command sets the Telnet session time-out value. The time-out value unit of time is
minutes and is specified by the minutes argument in the range 1–160 minutes.
Default 5
Format
session-timeout minutes
Mode Line Config
no session-timeout
This command sets the Telnet session timeout value to the default. The timeout value unit of
time is minutes.
Format
no session-timeout
Mode Line Config
M6100 Series Switches
Management Commands
58