Port (Tacacs Config); Priority (Tacacs Config); Show Tacacs - NETGEAR M6100 Series Reference Manual

Enter tacacs key:********
Re-enter tacacs key:********

port (TACACS Config)

Use the port command in TACACS Configuration mode to specify a server port number.
The server port-number argument is a number in the range 0–65535.
Default 49
Format
port port-number
Mode TACACS Config

priority (TACACS Config)

Use the priority command in TACACS Configuration mode to specify the order in which
servers are used, where 0 (zero) is the highest priority. The priority argument specifies
the priority for servers. The highest priority is 0 (zero), and the range is 0–65535.
Default 0
Format
priority priority
Mode TACACS Config
timeout
Use the timeout command in TACACS Configuration mode to specify the time-out value in
seconds. If no time-out value is specified, the global value is used. The seconds argument is
a number in the range 1–30 seconds as specifies the time-out.
Format
timeout seconds
Mode TACACS Config

show tacacs

Use the show tacacs command to display the configuration, statistics, and source interface
details of the TACACS+ client.
Format
show tacacs [ip-address | hostname | client | server]
Mode Privileged EXEC
Term Definition
Host address The IP address or hostname of the configured TACACS+ server.
Port The configured TACACS+ server port number.
M6100 Series Switches
Management Commands
137