Clock Timezone - NETGEAR M6100 Series Reference Manual

Parameter Description
hh:mm Time in 24-hour format in hours and minutes. The range is hours: 0 to 23, minutes: 0 to 59.
offset The number of minutes to add during the summertime. The range is 1 to 1440.
acronym The acronym for the summertime to be displayed when summertime is in effect. Up to four
characters are allowed.
Command example:
(NETGEAR Switch) (Config)# clock summer-time recurring 2 sun nov 3:18 2 mon nov 3:18
(NETGEAR Switch) (Config)# clock summer-time recurring 2 sun nov 3:18 2 mon nov 3:18
offset 120 zone INDA
no clock summer-time
This command disables the summer time settings.
Format
no clock summer-time
Mode Global Config
Command example:
(NETGEAR Switch) (Config)# no clock summer-time

clock timezone

Use this command to set the offset to Coordinated Universal Time (UTC). If the optional
parameters are not specified, they will be read as either 0 or \0 as appropriate.
Format
clock timezone {hours} [minutes minutes] [zone acronym]
Mode Global Config
Parameter Description
hours Hours difference from UTC. The range is -12 to +13.
minutes Minutes difference from UTC. The range is 0 to 59.
acronym The acronym for the time zone. The range is up to four characters.
Command example:
(NETGEAR Switch) (Config)# clock timezone 5 minutes 30 zone INDA
M6100 Series Switches
Utility Commands
215