Show Ip Ospf Database - NETGEAR M6100 Series Reference Manual

Term Definition
Next Hop Next hop toward the destination.
Next Hop Intf The outgoing router interface to use when forwarding traffic to the next hop.

show ip ospf database

This command displays information about the link state database when OSPF is enabled. If
you do not enter any parameters, the command displays the LSA headers for all areas. Use
the optional area-id parameter to display database information about a specific area. Use
the optional parameters to specify the type of link state advertisements to display.
Format
show ip ospf [[area-id] database [{database-summary | [{asbr-summary |
external | network | nssa-external | opaque-area | opaque-as | opaque-link |
router | summary}] [lsid] [{adv-router [ipaddr] | self-originate}]}]]
Mode Privileged EXEC
User EXEC
Parameter Description
asbr-summary Displays the autonomous system boundary router (ASBR) summary LSAs.
external Displays the external LSAs.
network Displays the network LSAs.
nssa-external DisplayS NSSA external LSAs.
opaque-area Displays area opaque LSAs.
opaque-as Displays AS opaque LSAs.
opaque-link Displays link opaque LSAs.
router Displays router LSAs.
summary Displays the LSA database summary information.
lsid Specifies the link state ID (LSID). The value of lsid can be an IP address or an integer in the range
of 0-4294967295.
adv-router Displays the LSAs that are restricted by the advertising router.
self-originate Displays the LSAs in that are self originated.
M6100 Series Switches
Routing Commands
742