Area Virtual-Link Hello-Interval (Ospfv); Area Virtual-Link Retransmit-Interval (Ospfv) - NETGEAR M6100 Series Reference Manual

Default 40
Format
area area-id virtual-link neighbor dead-interval seconds
Mode Router OSPFv3 Config
no area virtual-link dead-interval
This command configures the default dead interval for the OSPF virtual interface on the
virtual interface identified by area-id and neighbor. The neighbor parameter is the
Router ID of the neighbor.
Format
no area area-id virtual-link neighbor dead-interval
Mode Router OSPFv3 Config
area virtual-link hello-interval (OSPFv3)
This command configures the hello interval for the OSPF virtual interface on the virtual
interface identified by area-id and neighbor. The neighbor parameter is the Router ID
of the neighbor. The range for seconds is from 1 to 65535.
Default 10
Format
area area-id virtual-link neighbor hello-interval seconds
Mode Router OSPFv3 Config
no area virtual-link hello-interval
This command configures the default hello interval for the OSPF virtual interface on the
virtual interface identified by area-id and neighbor. The neighbor parameter is the
Router ID of the neighbor.
Format
no area area-id virtual-link neighbor hello-interval
Mode Router OSPFv3 Config
area virtual-link retransmit-interval (OSPFv3)
This command configures the retransmit interval for the OSPF virtual interface on the virtual
interface identified by area-id and neighbor. The neighbor parameter is the Router ID
of the neighbor. The range for seconds is 0 to 3600.
Default 5
Format
area area-id virtual-link neighbor retransmit-interval seconds
Mode Router OSPFv3 Config
M6100 Series Switches
IPv6 Commands
933