Interface Vlan; Show Ip Vlan - NETGEAR M6100 Series Reference Manual

line telnet
exit
line ssh
exit
!
router rip
exit
router ospf
exit
ipv6 router ospf
exit
exit

interface vlan

Use this command to enter Interface configuration mode for the specified VLAN. The vlan-id
range is 1 to 4093.
Format
interface vlan vlan-id
Mode Global Config

show ip vlan

This command displays the VLAN routing information for all VLANs with routing enabled.
Format
show ip vlan
Modes Privileged EXEC
User EXEC
Term Definition
MAC Address used The MAC Address associated with the internal bridge-router interface (IBRI). The same MAC
by Routing VLANs Address is used by all VLAN routing interfaces. It will be displayed above the per-VLAN information.
VLAN ID The identifier of the VLAN.
Logical Interface The logical unit/slot/port associated with the VLAN routing interface.
IP Address The IP address associated with this VLAN.
Subnet Mask The subnet mask that is associated with this VLAN.
M6100 Series Switches
Routing Commands
682