Boot Autoinstall; Boot Host Retrycount; Boot Host Dhcp - NETGEAR M6100 Series Reference Manual

boot autoinstall

Use this command to operationally start or stop the AutoInstall process on the switch. The
command is non-persistent and is not saved in the startup or running configuration file.
Default stop
Format
boot autoinstall {start | stop}
Mode Privileged EXEC

boot host retrycount

Use this command to set the number of attempts to download a configuration file from the
TFTP server. The number argument is a number in the range 1–3.
Default 3
Format
boot host retrycount number
Mode Privileged EXEC
no boot host retrycount
Use this command to set the number of attempts to download a configuration file to the
default value.
Format
no boot host retrycount
Mode Privileged EXEC

boot host dhcp

Use this command to enable AutoInstall on the switch for the next reboot cycle. The
command does not change the current behavior of AutoInstall and saves the command to
NVRAM.
Default enabled
Format
boot host dhcp
Mode Privileged EXEC
no boot host dhcp
Use this command to disable AutoInstall for the next reboot cycle.
Format
no boot host dhcp
Mode Privileged EXEC
M6100 Series Switches
Utility Commands
145