Show Chassis Watchdog - NETGEAR M6100 Series Reference Manual

CPLD version ............ ........ 0x01
POE D-card Description............ XCM89P ProSafe PoE+ daughter card
POE D-card PoE FW version.......
SFS Last Attempt Status........... None
Serial Number..................... 33J1245WF0022
Up Time........................... 4 days 21 hrs 52 mins 41 secs
Command example:
(NETGEAR Switch) #show chassis 3
Switch............................ 3
Management Status................. Chassis Member
Hardware Management Preference.... Unassigned
Admin Management Preference....... Disabled
Admin State....................... Enable
Power State....................... Enable
Switch Type....................... 0x4320004
Preconfigured Model Identifier.... XCM8948
Plugged-in Model Identifier....... XCM8948
Switch Status..................... OK
Switch Description................ XCM8948 ProSafe 48-port Gigabit blade
Detected Code in Flash............ 5.26.23.31
CPLD version ............ ........ 0x01
POE D-card Description............ Not Installed
POE D-card PoE FW version.......
SFS Last Attempt Status........... None
Serial Number..................... 2X61295V00008
Up Time........................... 4 days 21 hrs 56 mins 25 secs

show chassis watchdog

This command shows the internal watchdog timer on the switch, which reboots the switch if
the CPU becomes stuck or does not respond.
Format
show chassis watchdog
Mode Privileged EXEC
Command example:
(NETGEAR Switch)# show chassis watchdog
Slot Watchdog counter
1 0
2 1
3 0
M6100 Series Switches
1.0
NA
Chassis Commands
34