Clear Dhcp L2Relay Statistics Interface; Dhcp Client Commands; Dhcp Client Vendor-Id-Option; Dhcp Client Vendor-Id-Option-String - NETGEAR M6100 Series Reference Manual

Parameter Description
vlan-list Enter VLAN IDs in the range 1–4093. Use a dash (–) to specify a range or a comma (,) to separate
VLAN IDs in a list. Spaces and zeros are not permitted.

clear dhcp l2relay statistics interface

Use this command to reset the DHCP L2 relay counters to zero. Specify the port with the
counters to clear, or use the all keyword to clear the counters on all ports.
Format
clear dhcp l2relay statistics interface {unit/slot/port | all}
Mode Privileged EXEC

DHCP Client Commands

NETGEAR Managed Switch can include vendor and configuration information in DHCP client
requests relayed to a DHCP server. This information is included in DHCP Option 60, Vendor
Class Identifier. The information is a string of 128 octets.

dhcp client vendor-id-option

This command enables the inclusion of DHCP Option-60, Vendor Class Identifier included in
the requests transmitted to the DHCP server by the DHCP client operating in the NETGEAR
Managed Switch switch.
Format
dhcp client vendor-id-option string
Mode Global Config
no dhcp client vendor-id-option
This command disables the inclusion of DHCP Option-60, Vendor Class Identifier included in
the requests transmitted to the DHCP server by the DHCP client operating in the NETGEAR
Managed Switch switch.
Format
no dhcp client vendor-id-option
Mode Global Config

dhcp client vendor-id-option-string

This parameter sets the DHCP Vendor Option-60 string to be included in the requests
transmitted to the DHCP server by the DHCP client operating in the NETGEAR Managed
Switch switch.
Format
dhcp client vendor-id-option-string string
Mode Global Config
M6100 Series Switches
Switching Commands
487