Do (Captive Portal Instance Mode) - NETGEAR M6100 Series Reference Manual

no session-timeout
Use this command to set the session time-out for a captive portal configuration to the default
value.
Format
no session-timeout
Mode Captive Portal Instance
idle-timeout
This command configures the idle time-out for a captive portal configuration. The timeout
variable is a number that represents the idle time-out in seconds. Use 0 to indicate that the
time-out is not enforced.
Default 0
Format
idle-timeout timeout
Mode Captive Portal Instance
no idle-timeout
Use this command to set the idle time-out for a captive portal configuration to the default
value.
Format
no idle-timeout
Mode Captive Portal Instance
locale
This command is not intended to be a user command. The administrator must use the WEB
user interface to create and customize captive portal web content. The command is primarily
used by the NETGEAR Managed Switch show running config command and process
as it provides the ability to save and restore configurations using a text-based format.
Format
locale web-id
Mode Captive Portal Instance

do (Captive Portal Instance mode)

Use this command to run Privileged Exec mode commands.
Format
do
Mode Captive Portal Instance
M6100 Series Switches
Captive Portal Commands
779