Show Ip Verify Source; Show Ip Verify Interface - NETGEAR M6100 Series Reference Manual

show ip verify source

Use this command to display the IPSG configurations on all ports.
Format
show ip verify source
Mode Privileged EXEC
User EXEC
Term Definition
Interface Interface address in unit/slot/port format.
Filter Type Is one of two values:
ip-mac: User has configured MAC address filtering on this interface.
ip: Only IP address filtering on this interface.
IP Address IP address of the interface
MAC Address If MAC address filtering is not configured on the interface, the MAC Address field is empty. If port
security is disabled on the interface, then the MAC Address field displays "permit-all."
VLAN The VLAN for the binding rule.
Command example:
(NETGEAR Switch) #show ip verify source
Interface Filter Type
--------- -----------
0/1 ip-mac
0/1 ip-mac

show ip verify interface

Use this command to display the IPSG filter type for a specific interface.
Format
show ip verify interface unit/slot/port
Mode Privileged EXEC
User EXEC
Term Definition
Interface Interface address in unit/slot/port format.
Filter Type Is one of two values:
ip-mac: User has configured MAC address filtering on this interface.
ip: Only IP address filtering on this interface.
M6100 Series Switches
IP Address MAC Address
--------------- -----------------
210.1.1.3 00:02:B3:06:60:80
210.1.1.4 00:0F:FE:00:13:04
Switching Commands
497
Vlan
-----
10
10