Deny Service; Deny Priority; Management Access-Class; Show Management Access-List - NETGEAR M6100 Series Reference Manual

deny service

This command sets deny conditions for the management access list based on the access
protocol. Each rule requires a unique priority. Use this command in Management access-list
configuration mode.
Format
deny service service [priority priority]
Mode Management access-list configuration
Parameter Definition
service Indicates the service type: telnet, ssh, http, https, or snmp.
priority The priority for the rule.

deny priority

This command assigns a deny priority to the rule. Each rule requires a unique priority. Use
this command in Management access-list configuration mode.
Format
deny priority priority
Mode Management access-list configuration

management access-class

This command activates the configured management ALC and restricts management
connections within the management ACL. The name parameter is the name of the existing
management ACL. You cannot update or remove a management ACL when it is active.
Format
management access-class name
Mode Global Config
no management access-class
This command disables a management ACL.
Format
no management access-class
Mode Global Config

show management access-list

This command displays information about the configured management ALC.
Format
show management access-list [name]
Mode Privileged EXEC
M6100 Series Switches
Management Commands
67