Serial Baudrate - NETGEAR M6100 Series Reference Manual

configure
This command gives you access to the Global Config mode. From the Global Config mode,
you can configure a variety of system settings, including user accounts. From the Global
Config mode, you can enter other command modes, including Line Config mode.
Format
configure
Mode Privileged EXEC
line
This command gives you access to the Line Console mode, which allows you to configure
various Telnet settings and the console port, as well as to configure console login/enable
authentication.
Format
line {console | telnet | ssh}
Mode Global Config
Term Definition
console Console terminal line.
telnet Virtual terminal for remote console access (Telnet).
ssh Virtual terminal for secured remote console access (SSH).
Command example:
((NETGEAR Switch)(config)#line telnet
(NETGEAR Switch)(config-telnet)#

serial baudrate

This command specifies the communication rate of the terminal interface. The supported
rates are 1200, 2400, 4800, 9600, 19200, 38400, 57600, 115200.
Default 9600
Format
serial baudrate {1200 | 2400 | 4800 | 9600 | 19200 | 38400 | 57600 | 115200}
Mode Line Config
no serial baudrate
This command sets the communication rate of the terminal interface.
Format
no serial baudrate
Mode Line Config
M6100 Series Switches
Management Commands
54