Mode Dot1Q-Tunnel; Mode Dvlan-Tunnel; Show Dot1Q-Tunnel - NETGEAR M6100 Series Reference Manual

mode dot1q-tunnel

This command is used to enable Double VLAN Tunneling on the specified interface.
Default disabled
Format
mode dot1q-tunnel
Mode Interface Config
no mode dot1q-tunnel
This command is used to disable Double VLAN Tunneling on the specified interface. By
default, Double VLAN Tunneling is disabled.
Format
no mode dot1q-tunnel
Mode Interface Config

mode dvlan-tunnel

Use this command to enable Double VLAN Tunneling on the specified interface.
Note: When you use the mode dvlan-tunnel command on an interface,
it becomes a service provider port. Ports that do not have double
VLAN tunneling enabled are customer ports.
Default disabled
Format
mode dvlan-tunnel
Mode Interface Config
no mode dvlan-tunnel
This command is used to disable Double VLAN Tunneling on the specified interface. By
default, Double VLAN Tunneling is disabled.
Format
no mode dvlan-tunnel
Mode Interface Config

show dot1q-tunnel

Use this command without the optional parameters to display all interfaces enabled for
Double VLAN Tunneling. Use the optional parameters to display detailed information about
Double VLAN Tunneling for the specified interface or all interfaces.
M6100 Series Switches
Switching Commands
377