Show Ip Interface Brief - NETGEAR M6100 Series Reference Manual

Command example:
The following example enables the DHCP client on a VLAN routing interface:
(NETGEAR Switch) #show ip interface vlan 10
Routing Interface Status................. Up
Method................................... DHCP
Routing Mode............................. Enable
Administrative Mode...................... Enable
Forward Net Directed Broadcasts.......... Disable
Active State............................. Inactive
Link Speed Data Rate..................... 10 Half
MAC address.............................. 00:10:18:82:16:0E
Encapsulation Type....................... Ethernet
IP MTU................................... 1500
Bandwidth................................ 10000 kbps
Destination Unreachables................. Enabled
ICMP Redirects........................... Enabled
Interface Suppress Status................ Unsuppressed
DHCP Client Identifier................... 0NETGEAR-0010.1882.160E-vl10

show ip interface brief

This command displays summary information about IP configuration settings for all ports in
the router, and indicates how each IP address was assigned.
Format
show ip interface brief
Modes Privileged EXEC
User EXEC
Term Definition
Interface Valid slot and port number separated by a forward slash.
State Routing operational state of the interface.
IP Address The IP address of the routing interface in 32-bit dotted decimal format.
IP Mask The IP mask of the routing interface in 32-bit dotted decimal format.
Method Indicates how each IP address was assigned. The field contains one of the following values:
• DHCP. The address is leased from a DHCP server.
• Manual. The address is manually configured.
Command example:
(alpha1) #show ip interface brief
Interface State IP Address
M6100 Series Switches
IP Mask Method
Routing Commands
639