Session-Timeout (Captive Portal Instance) - NETGEAR M6100 Series Reference Manual

Parameter Description
bytes Output octets in bytes. 0 indicates limit not enforced.
no max-output-octets
This command sets to the default the maximum number of octets the user is allowed to
receive.
Format
no max-output-octets
Mode Captive Portal Instance
max-total-octets
This command configures the maximum number of octets the user is allowed to transfer, i.e.,
the sum of octets transmitted and received. After this limit has been reached the user will be
disconnected. If the value is set to 0, then the limit is not enforced.
Default 0
Format
max-total-octets bytes
Mode Captive Portal Instance
Parameter Description
bytes Total octets in bytes. 0 indicates limit not enforced.
no max-total-octets
This command sets to the default the maximum number of octets the user is allowed to
transfer, that is, the sum of octets transmitted and received.
Format
no max-total-octets
Mode Captive Portal Instance

session-timeout (Captive Portal Instance)

This command configures the session time-out for a captive portal configuration. The
timeout variable is a number that represents the session time-out in seconds. Use 0 to
indicate that the time-out is not enforced.
Default 0
Format
session-timeout timeout
Mode Captive Portal Instance
M6100 Series Switches
Captive Portal Commands
778