Debug Dcbx Packet; Debug Debug-Config - NETGEAR M6100 Series Reference Manual

Parameter
kernel
crashlog-number
upload url
proc
verbose
deleteall
data
crashdump-number
download url
component-id
item-number
additional-parameter
slot

debug dcbx packet

Use this command to enable debug tracing for DCBX packets that are transmitted or
received.
Note: To display the debug trace, enable the
Default disabled
Format
debug dcbx packet {receive | transmit}
Mode Privileged EXEC

debug debug-config

Use this command to download or upload the debug-config.ini file. The debug-config. ini file
executes CLI commands (including devshell and drivshell commands) on specific predefined
events. The debug config file is created manually and downloaded to the switch.
Note: To display the debug trace, enable the
M6100 Series Switches
Description
View the crash log file for the kernel
Specifies the file number to view. The system maintains up to four copies, and the valid range
is 1 – 4.
To upload the crash log (or crash dump) to a TFTP server, use the upload keyword and
specify the required TFTP server information.
View the application process crashlog.
Enable the verbose crashlog.
Delete all crash log files on the system.
Crash log data recorder.
Specifies the crash dump number to view. The valid range is 0 – 2.
To download a crash dump to the switch, use the download keyword and specify the
required TFTP server information.
The ID of the component that caused the crash.
The item number.
Additional parameters to include.
The slot number for the blade on which the crashlog is located.
Utility Commands
243
debug console command.
debug console command.