Configure Mvr; Configure Basic Mvr Settings - NETGEAR M4300 User Manual
Fully managed stackable switches
Hide thumbs
Also See for M4300:
- Installation manual (59 pages) ,
- Installation (2 pages) ,
- Software administration manual (688 pages)
Table of Contents
Advertisement
M4300 Series and M4300-96X Fully Managed Switches User Manual
The following table describes the nonconfigurable information displayed on the page.
Table 89. Querier VLAN Configuration
Field
Operational State
Operational Version
Last Querier Address
Last Querier Version
Operational Max Response Time
Configure MVR
You can configure basic, advanced, group, interface or group membership settings.
Configure Basic MVR Settings
To configure basic MVR settings:
Launch a web browser.
1.
In the address field of your web browser, enter the IP address of the switch.
2.
The login window opens.
Enter the user name and password.
3.
The default admin user name is admin and the default admin password is blank, that is,
do not enter a password.
Click the Login button.
4.
The System Information page displays.
Select Switching > MVR > Basic > MVR Configuration.
5.
Description
The operational state of the MLD snooping querier on a VLAN. It can be in
any of the following states:
Querier: Snooping switch is the querier in the VLAN. The snooping
•
switch sends out periodic queries with a time interval equal to the
configured querier query interval. If the snooping switch sees a better
querier in the VLAN, it moves to non-querier mode.
Non-Querier: Snooping switch is in non-querier mode in the VLAN. If
•
the querier expiry interval timer is expired, the snooping switch moves
into querier mode.
Disabled: Snooping querier is not operational on the VLAN. The
•
snooping querier moves to disabled mode when MLD snooping is not
operational on the VLAN or when the querier address is not configured
or the network management address is also not configured.
The operational MLD protocol version of the querier.
The IP address of the last querier from which a query was snooped on the
VLAN.
The MLD protocol version of the last querier from which a query was
snooped on the VLAN.
Displays maximum response time to be used in the queries that are sent by
the snooping querier.
Configure Switching Information
252
Advertisement
Table of Contents
Troubleshooting
