Chapter 2 Using The Command-Line Interface - NETGEAR M6100 Series Reference Manual

Using the Command-Line Interface
2.
The command-line interface (CLI) is a text-based way to manage and monitor the system. You
can access the CLI by using a direct serial connection or by using a remote logical connection
with telnet or SSH.
This chapter describes the CLI syntax, conventions, and modes. It contains the following
sections:
• Command Syntax
• Command Conventions
• Common Parameter Values
• unit/slot/port Naming Convention
• Using the No Form of a Command
• Executing Show Commands
• CLI Output Filtering
10
2